| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Chet Atkins SST / Shadow pickups http://www-.luthiersforum.com/forum/viewtopic.php?f=10137&t=47464 |
Page 1 of 1 |
| Author: | Chris Pile [ Wed Mar 16, 2016 8:43 pm ] |
| Post subject: | Chet Atkins SST / Shadow pickups |
OK - Got hold of an Epiphone Chet Atkins SST with the Shadow pickup (Nanoflex?).... and someone really butched up the pickup and the electronics. They pulled the wire out of the pickup, and it just doesn't want to be fixed. Also, some knothead got to the guitar before me and tried to replace one of the tone pots, not only using the wrong type, but shorting out the circuit board in the process. I can get the pot and circuit board squared away, but I think the pickup is toast. Does anyone have any NOS parts for these guitars? Apparently Epiphone can't be bothered anymore, and from what I gather - Shadow may not offer the old style pickup. Can I simply use another under saddle piezo pickup, or is it worth the hassle to retrofit all new stuff? The rest of the guitar seems to be quite usable - neck good, body just a few nicks and cracks. |
|
| Author: | William Bustard [ Wed Mar 16, 2016 10:23 pm ] |
| Post subject: | Re: Chet Atkins SST / Shadow pickups |
Theres a seller in Canada on that infamous auction site called bezdez who has shadow undersaddle pickups and lots of shadow parts, sometimes- might find something there. I think any old undersaddle thing would work. I think the shadow ones kinda looked like vintage braided 2 conductor pickup wire didn't they? They probably have those amongst others. They sell internationally too. Ive gotten many parts form them over the years. Very honorable folks. |
|
| Author: | Chris Pile [ Wed Mar 16, 2016 11:22 pm ] |
| Post subject: | Re: Chet Atkins SST / Shadow pickups |
Bought lots of stuff from Bezdez on eBay. I'll check it out. |
|
| Author: | B. Howard [ Thu Mar 17, 2016 6:01 am ] |
| Post subject: | Re: Chet Atkins SST / Shadow pickups |
I have replaced them with new style UST's without problems. |
|
| Author: | Chris Pile [ Thu Mar 17, 2016 9:02 am ] |
| Post subject: | Re: Chet Atkins SST / Shadow pickups |
Thanks for the tip, Brian! |
|
| Author: | Chris Pile [ Sat Mar 19, 2016 9:04 pm ] |
| Post subject: | Re: Chet Atkins SST / Shadow pickups |
OK, the pickup fits down inside this plastic channel - it's very narrow. Just any old piezo ain't gonna work, without a lot of dance steps and pain. Anyone want the husk of this thing? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|